7 Best Running Shoes in 2024

How we test running shoes

We focus on delivering objective running shoe reviews, and we're able to do that because we not only run in the shoes but also twist them, fill them with smoke, cut them in half, put them in the freezer, and perform dozens of standardized tests in our lab.

Here's what our workflow looks like:

• As an independent shoe testing lab, we purchase all shoes with our own money to stay unbiased.
• We run 30-50 miles in each pair. We make sure that we vary our runs from roads to trails and from recovery runs to sprints before submitting our in-depth reviews.
• We cut shoes into pieces and measure over 30 parameters on midsole softness, durability, breathability, stiffness, stack heights, platform width, insole thickness, and more. 

There is no ONE best running shoe

All feet are unique and even some of the best-rated running shoes might not work for you specifically.

But the good news is that the running footwear market is so saturated that you are sure to find a shoe that would feel tailor-made for your feet!

In this guide, we break down the most important considerations to help you narrow down the choices and find that perfect pair.

Where to start: road vs. trail running shoes

This one is simple: If you mostly run on asphalt, tarmac, treadmill, 4x4 road, or even major forest trails or the likes, then buy road running shoes.

Only buy trail running shoes if you run on single trails or off trails. Otherwise, you don’t need them.

Road running shoes

Some road shoes can also be used for light-to-moderate trails. Just make sure that they have thick and sturdy rubber outsoles.

Outsole durability shows how deep was the damage caused by 22 seconds of drilling the shoe’s rubber with a Dremel at 10K RPM speed.

Trail running shoes

You should not be afraid to run on roads with your trail running shoes once in a while. Quite often, you’d need to run up to a mile before you get to your nearest trail, and that is not a problem. However, we recommend that you keep it at a minimum as feet and knees can start to hurt.

The bigger the lugs, the sooner your feet will start hurting. For road-to-trail shoes, lugs below 3 mm are best.

If, on the other hand, you mostly run off trails, in the wild, with mud caking up under your feet within minutes, you must get a trail shoe with deeper lugs. They will keep you surefooted by biting into the ground more aggressively. They also tend to be more spaced-out to shed off the mud while running.

Key differences between road and trail shoes

Outsole: Road shoes have flatter and pavement-ready soles. Trail shoes have lugs (tread patterns), for better traction on uneven terrain.

Protection: Most trail shoes are equipped with rugged toe bumpers and rock plates to keep the runner’s feet protected from various terrain challenges.

Weight: Because of the added ruggedness and protection, trail shoes are on average an ounce heavier than road shoes.

Upper: Road shoes have lighter, more breathable uppers because road races don’t have any obstacles. Trail shoes are reinforced with various protective elements, including additional layers in high-wear areas, which makes them less breathable.

Based on our in-house ventilation tests, the average breathability score of road shoes is 4 out of 5, while the average of trail shoes is 3 out of 5.

Use: The most important factor

A beginner-friendly trainer is going to be vastly different from a carbon-plated marathon race shoe. Let’s take a closer look at the main running shoe categories based on their intended use.

Daily running shoes (also best for beginners and daily wear)

Well-cushioned and comfort-loaded, daily trainers make up the majority of running shoes on the market. This is where you find that go-to daily beater that never fails.

We highly recommend shoes from this category to beginner runners as they meet the following criteria:

• well-cushioned (at least 30 mm of heel stack)
• average heel-to-toe drop (8-14 mm, ideal for a beginner’s heel-striking pattern)
• balanced softness (neither too firm nor mushy)
• no carbon plates or aggressive rockers
• MSRP of $140 or less

Can you wear daily running shoes for everyday use? Absolutely! The characteristics mentioned above make this footwear category ideal for spending long hours on your feet.

Some daily trainers have features of speed-oriented shoes. These are more expensive but let you have two pairs in one.

Tempo/speed training running shoes

Lighter than daily trainers, this category is better equipped for picking up the pace or even setting a new speed record. 

The average weight of tempo shoes is 2.4 oz (68g) lighter than the average of daily trainers!

Tempo training shoes also tend to have bouncier foams and springier rides. Some of them even use stiff carbon plates for added propulsion. You can learn more about how plates work in our extensive research.

Some speed trainers can also be used for daily training or even competitions.

Race/competition running shoes

This is where you find the world-record-shattering Nike Vaporfly’s and Alphafly’s, Adidas’s buzzworthy $500 Evo 1, among other iconic shoes.

The lightest of running shoes (7.5 oz/213g on average), these racers feature the brands’ most cutting-edge technologies to help you achieve the most efficient performance.

For professional runners, choosing the perfect race shoe gets even more complicated. But it is our mission to help you sort that out. Explore our meticulous guides on foams, carbon plates, rockers, and shoe uppers to get more insights.

Consider the distance as well

A 5K/10K race calls for a much faster pace than a marathon. Your best companion here is a light and springy trainer. Depending on your preference, you can choose between a classic minimally cushioned flat and a super soft and plated maximalist shoe.

Going for a marathon or even an ultra marathon? Make sure you're packed with plenty of cushioning, lasting underfoot support, and a perfect fit.

Some super shoes are so versatile, they can be effective for both 5K and 42K.

Cushioning and ride in running shoes

That slab of foam in between your foot and the ground is what ultimately makes or breaks a running shoe. Getting the following parameters right will guarantee your comfort and best performance:

• stack height
• heel-to-toe drop
• foam softness
• presence of a carbon plate
• presence of a rocker

Stack height in running shoes

Stack height refers to the amount of material in between your foot and the ground. We cut each tested shoe in half in our lab to measure its heel and forefoot stack heights following the rules set by World Athletics (at 12% and at 75% of the inside length of the shoe). 

For beginners, we recommend going for heel height in the 28-35 mm range. These shoes are neither too flat (low to the ground) nor too high.

If you need tons of cushioning, go for the 35-40 mm range. Keep in mind that 40 mm is the maximum heel stack allowed for competitions by the World Athletics. Anything above means disqualification.

Some seasoned runners also prefer to go down the minimalist and even barefoot path. These shoes have a heel stack of 20 mm or less and require an adaptation period as they activate different biomechanics.

Still not sure which one to choose? We have developed a tool to help you find out which stack height is perfect for your running needs.

Heel-to-toe drop in running shoes

If you’re new, or if you run less than 10 miles per week, there’s no need to know about heel-to-toe drop as long as you buy shoes with at least 6 mm drop (preferably 8-12 mm).

The only exception is if you have a record of severe ankle, knee, hip, ITB, Achilles, or plantar fasciitis injuries. In such cases, seek out a specialist before buying running shoes.

More experienced runners tend to show interest in the heel-to-toe drop. There are a lot of opinions on the subject. If you want to learn more, check our in-depth scientific guide to heel-to-toe drop.

Foam softness

As a beginner runner, you want a balanced type of cushioning that's neither too plush nor firm. These shoes also work for most runners, walking a fine line between comfort and performance. This type of cushioning is used in the "workhorse" shoes used for daily running, tempo runs, and racing.

To help you know exactly how soft each running shoe is, we use an HA durometer in our lab to measure foam softness. The lower the number on the tool, the softer the foam. The average durometer measurement for running shoes hovers around 25 HA.

Softer shoes offer maximum impact protection and are usually high-stacked. They are best for long runs, recovery runs, marathons, and ultras.

Example of a very plush foam (9.8 HA)

Lower-stacked and aggressive-looking, firmer shoes are best for quick transitions. Studies show that greater midsole hardness in running shoes results in shorter contact time. But keep in mind that there is much less shock absorption here than in soft shoes. On the bright side, firmer shoes tend to be stable enough to double as gym shoes.

Example of a very firm foam (34.4 HA)

If you want more data-backed insights into choosing between soft and firm cushioning, see our in-depth guide on the topic. Especially if you're wondering how shoe foams behave in the freezer!

Carbon-plated running shoes

If you are a beginner runner, we recommend staying away from carbon-plated shoes for now. These shoes are most beneficial for races and tempo training as they are intended for maintaining faster paces.

First introduced in the Nike Vaporfly in 2016, carbon plates changed the running shoe game forever. Since then, every men's and women's record on every distance has been broken by runners wearing plated shoes.

At least 5% of running shoes on the market today feature some variation of a plate.

A stiff carbon plate is sandwiched inside the midsole to add propulsion upon take-off. Kind of like a swimming pool springboard.

We dive deeper into the topic of carbon-plated shoes in our extensive guide backed by science and our own lab findings.

What is arch support and why it matters 

If you've never heard about arch support, your ankles don't collapse inwards, and shoes don't have a tendency to wear out more on the inner side, then you can probably skip this section.

Arch support is only necessary when you have flat feet, overpronation, or other foot conditions that call for supportive components in running shoes (like plantar fasciitis). The latter are also called stability shoes.

You can see the difference in foot and ankle stability between a neutral shoe (above) and a stability shoe (below) in our lateral movement test.

Here are a few rough guidelines: 

• If you don’t know anything particular about your feet, buy neutral running shoes.
• If you have a moderate arch and neutral pronation, buy neutral running shoes.
• If you have a high arch, consider neutral running shoes.
• If you have a moderate arch, buy stability running shoes.

To determine pronation, look at your used footwear - do you wear them evenly? If they’ve been worn more on the outer sides, you’re underpronating. If they’ve been worn more on the inner sides, you’re overpronating. Even wear means neutral pronation.

If you want to know everything about arch support in running shoes, you must check out our in-depth guide.

Before we can recommend a stability running shoe, we perform a series of tests and measurements to assess its supportive capacity:

• torsional stiffness (higher rigidity = better support)

• heel counter stiffness (higher rigidity = firmer heel hold)

• midsole width (extended contact points prevent the foot from rolling over)

Choosing the right size and fit in running shoes

If it's been a while since you last purchased a running shoe, we highly recommend measuring your foot length from scratch.

Too busy for that? Grab an athletic shoe that fits you the best and enter its CM or MM size (i.e. 260, 265, etc.) into this shoe size converter.

Going with the shoe size you think you have is a risky strategy as every brand has a different size chart. Even within the same brand, the right size for you may vary from one model to another.

So once you have your precise foot length measurement, do consult the corresponding brand size chart.

In addition to size (length), you must also consider your future shoe's fit. It must not be too tight or too loose around your heel, midfoot, or forefoot. Unfortunately, it's hard to gauge the first two when purchasing online, but we can help with the toebox fit!

Using a caliper, we measure each shoe's upper width at the widest part (near the big toe joint). We also repeat the measurement closer to the shoe's tip (where the big toe ends).

Having both measurements allows us to convey the entire toebox shape as some shoes can be wide enough at the metatarsals but taper aggressively towards the front.

If you are someone with wide feet or bunions, we recommend checking our toebox measurements before purchasing the shoe.

For more nuances on the fit of running shoes, see our guide on choosing the right toebox. 

Consider breathability and waterproofing

A vast majority of running shoes are made with breathable mesh uppers which keep the feet fresh. Based on our smoke-pumping machine tests, 60% of running shoes have high breathability scores of 4-5 out of 5.

We assess ventilation by the amount of smoke that escapes through the upper fabric. We then also hover the shoe's half-cut upper over the light to see where most ventilation pores are concentrated.

Waterproof shoes are needed in very rare cases. Only if you regularly run in rainy weather, puddles, slush, and low temperatures. Or if you have multiple creeks or streams crossing your trail. There is a good reason why only 7% of running shoes in our catalog are waterproof.

For winter, you might be just fine getting a non-waterproof pair with a lower breathability score of 1-3.