Our verdict
- Top pick in best New Balance trainers
- Top pick in best trainers
Pros
- Unexpectedly lighter than average
- Real suede and quality materials
- Extra thick cushioning for all-day wear
- Comfortable and springy FuelCell foam
- Mind-blowing arch support and stability
- Exceptionally hard-wearing outsole
- Fantastic breathability
- Well-padded all around
- Six(!) widths available
Cons
- Very delicate toebox mesh
- A bit stiff
Audience verdict
- Top 1% in New Balance 990
Comparison
The most similar trainers compared
+ + Add a shoe | |||||
---|---|---|---|---|---|
Audience score | 86 Decent! | 89 Good! | 88 Good! | 95 Superb! | |
Price | $200 | $220 | $160 | $100 | |
Style | ClassicDadRetroSportyChunky | ClassicDadSportyChunky | RetroSportyFuturistic | DadSportyChunky | |
Breathability | Breathable | Breathable | Breathable | Breathable | |
Weight lab | 12.9 oz / 366g | 15.3 oz / 434g | 13.1 oz / 370g | 12.2 oz / 347g | |
Size | True to size | True to size | True to size | - | |
Midsole softness | Balanced | Balanced | Balanced | Balanced | |
Material | MeshSuede | LeatherMesh | Mesh | LeatherMesh | |
Season | Summer | Summer | Summer | Summer | |
Inspired from | Running | Running | Running | Running | |
Toebox width at the widest part | Medium | Medium | Medium | Medium | |
Toebox width at the big toe | Medium | Medium | Wide | Medium | |
Leather/suede quality | Real suede | Real leather | - | - | |
Toebox durability | Bad | Bad | Good | Good | |
Heel padding durability | Decent | Good | Decent | Decent | |
Outsole durability | Good | Good | Good | Good | |
Heel stack lab | 39.1 mm | 34.6 mm | 40.3 mm | 35.3 mm | |
Stiffness | Moderate | Stiff | Moderate | Moderate | |
Tongue padding | Average | Average | Average | Average | |
Drop lab | 15.3 mm | 14.6 mm | 15.8 mm | 15.0 mm | |
Forefoot | 23.8 mm | 20.0 mm | 24.5 mm | 20.3 mm | |
Removable insole | ✓ | ✓ | ✓ | ✓ | |
Heel tab | None | None | None | None | |
Torsional rigidity | Stiff | Stiff | Moderate | Moderate | |
Heel counter stiffness | Stiff | Stiff | Stiff | Moderate | |
Sustainable | ✗ | ✗ | ✗ | ✓ | |
Reflective elements | ✓ | ✓ | ✗ | ✗ | |
Closure | Laces | Laces | Laces | Laces | |
Top | Low top | Low top | Low top | Low top | |
Ranking | #99 Bottom 5% | #66 Bottom 37% | #87 Bottom 17% | #6 Top 6% | |
Popularity | #70 Bottom 33% | #99 Bottom 5% | #57 Bottom 45% | #82 Bottom 21% |
Who should buy
We believe that the 990 v6 would be a perfect match for someone who:
- wants a dad shoe vibe of the 990 series but with a modern twist;
- values premium quality and craftsmanship of shoes that are made in the USA;
- prefers casual kicks with the latest tech from running shoes (the v6 uses FuelCell foam for cushioning).
Who should NOT buy
The New Balance 990 v6 comes exceptionally close to being flawless. We believe that for most people the biggest drawback of this sneaker would be its price point.
With an MSRP of £200, it is nearly £80 more than the average sneaker! But luckily, New Balance has much more affordable silhouettes with a similar vibe. Have a look at the preceding 990 v3, the numerous colour options of the 2002R, or the chunky beauty of the 9060.
Cushioning
Heel stack
With a calliper measurement of 39.1 mm, the 990 v6 turns out to have the thickest midsole in the 990 series. The OG shoe came in at 34.4 mm.
Aside from offering even more comfort and cushioning, the shoe also adds a few millimetres to the wearer's height.
990 v6 | 39.1 mm |
Average | 29.7 mm |
Forefoot stack
The forefoot stack in the 990 v6 also turns out to be on the thicker side at 23.8 mm. It is a bit taller than average which may feel odd and disconnected for people used to low-profile trainers like Adidas' Sambas and Superstars.
990 v6 | 23.8 mm |
Average | 18.8 mm |
Drop
We couldn't help but notice that the 990 v6 felt more elevated under the heel, creating a 15.3 mm slope from the heel to the toes.
While this is a matter of personal preference, we must point out this higher-than-average measurement. Some people do enjoy the added cushion under the heel while others feel as though they are slightly sliding forward in trainers like that.
But if you've worn New Balance's 550 (15.7 mm drop), this setup is going to feel familiar.
990 v6 | 15.3 mm |
Average | 10.9 mm |
Midsole softness
The 6th 990 edition introduces one of the most dramatic updates in the series: the brand-new FuelCell cushioning. This foam migrated from NB's running footwear and is known by the athletes for its cloud-like characteristics. It is used in many elite, performance-oriented kicks from the brand.
We couldn't believe how much squishier and bouncier the 990 got thanks to the FuelCell! It feels nothing like the firm EVA of the first 990.
As our durometer shows, the FuelCell is notably softer with a reading of 28.3 HA. For reference, the v1 had a measurement of 35.0 HA (24% firmer).
990 v6 | 28.3 HA |
Average | 29.2 HA |
Insole thickness
As if a thick slab of FuelCell foam wasn't enough, New Balance also packed a generously padded insole into the 990 v6. According to our calliper, it is over a millimetre thicker than average at 6.6 mm!
990 v6 | 6.6 mm |
Average | 5.1 mm |
Size and fit
Size
New Balance 990 v6 is true to size (159 votes).
Toebox width - widest part
New Balance never skimps on toebox space.
Taking measurements of the 990 v6, our calliper showed 100.2 mm in the widest part of the forefoot. This is a tiny bit wider than average but is ideal for medium-width feet.
990 v6 | 100.2 mm |
Average | 98.9 mm |
Toebox width - big toe
We repeated the measurement where the big toe normally ends and got 77.4 mm. That is also a tad bit wider than average, proving that there is no aggressive tapering of the shoe.
But the best news is that the NB 990 v6 can fit any foot shape on the planet by being available in 6 different widths, from X-Narrow to XX-Wide.
990 v6 | 77.4 mm |
Average | 75.0 mm |
Stability
Lateral stability test
Stability and arch support were ingrained into the 990 shoes from the very first edition back in 1982. As technologies evolved over the years, the 990 v6 (released in 2022) embodied the best practises in this department.
Testing the shoe's lateral stability with a side-to-side ankle movement, our jaws dropped on our shoes in amazement... The 990 v6 delivers some of the best support you can find in casual trainers! In fact, it feels just as stable as the ASICS Gel Kayano 30, a running shoe dedicated to severe overpronation!
So if you have flat feet, overpronation (excessive inward rolling of the foot), plantar fasciitis, or any other condition that requires a strong arch support, the New Balance 990 v6 is one of the best trainers you can get.
Torsional rigidity
The primary stabilising component of the 990 v6 is of course the brand's proprietary ENCAP rim around the heel. Made of stiff polyurethane, it wraps around the rearfoot, clutches it firmly, and leaves no chance for awkward ankle rolls.
It added so much torsional rigidity to the sneaker that we could barely twist it in our manual test. On a 1-5 scale, where 5 is the stiffest, the 990 v6 clearly deserves the maximum 5.
990 v6 | 5 |
Average | 3.5 |
Heel counter stiffness
But support doesn't end with the midsole. We found that the 990 v6 also made sure that our heels were securely held inside the heel cup.
Checking the shoe's heel counter stiffness with a squeeze-and-push test, we felt a good amount of rigidity. We rated it as 4 on a 1-5 stiffness scale.
990 v6 | 4 |
Average | 3.2 |
Midsole width - forefoot
The ensemble wouldn't be complete without a broad platform to step on. And the 990 v6 nails it again. We believe that it's almost impossible to lose balance in this aircraft carrier of a shoe.
We measured the widest area of the shoe's forefoot at 113.8 mm which is a few millimetres more than the average sneaker. Based on our lab data, very few trainers extend past 112 mm.
990 v6 | 113.8 mm |
Average | 108.5 mm |
Midsole width - heel
Forget about spilling your foot over the edge of a shoe. The 990 v6 comes with a wider-than-average platform in the heel too!
Our calliper measurement shows that the widest area of the heel measures 88.0 mm.
990 v6 | 88.0 mm |
Average | 83.2 mm |
Flexibility / Stiffness
Balancing stability and flexibility without compromising either is one of the eternal struggles in shoe design. The original 990 v1 release was extensively marketed as the shoe that got it right. And we found it to be true.
However, in the 990 v6, the balance shifted more toward support, causing the shoe to lose some pliability.
Using a force gauge, we found that it takes more force to bend the v6 than it takes an average sneaker. To be precise, it takes 20% more!
990 v6 | 27.4N |
Average | 22.9N |
Weight
With the added padding and midsole foam, the 990 v6 happens to be visually heavier than it is.
Let us reassure you of the shoe's amazing lightness by putting it on the scale. With a surprising weight of 12.9 oz (366g) in a men's US size 9, the v6 is not only an ounce lighter than average but also lighter than the preceding v5 (13.7 oz/388g)!
Even when wearing the shoe all day, we never felt dragged down by the v6.
990 v6 | 12.91 oz (366g) |
Average | 13.86 oz (393g) |
Breathability
With suede layers all over it, the 990 v6 doesn't give the impression of a breathable sneaker. But get the shoe on and you will be convinced of the opposite.
The mesh panels on this sneaker did a fabulous job of letting the heat escape and keeping our feet refreshed throughout the day.
You can see how easily the smoke passes through the shoe's fabric in our in-house breathability test. On a 1-5 scale, where 5 is the most breathable, we confidently granted the highest score to the 990 v6. It is a summer-ready one for sure!
Just look at how thin and transparent the mesh parts of the upper are!
A closer look at them through our microscope revealed pretty large gaps in between the chain links.
For comparison, let's take a look at the upper mesh on the original 990. That shoe had the lowest breathability score in the 990 collection.
990 v6 | 5 |
Average | 3 |
Durability
Leather/Suede quality
With its above-average price tag and "Made in USA" claim, the 990 v6 calls for a thorough quality check.
To test whether the shoe's suede was real, we attempted to set it on fire with a butane torch. Luckily, the material didn't catch fire or melt away which only confirmed its genuineness.
990 v6 | Real suede |
Toebox durability
Keeping suede overlays to a minimum, New Balance made the 990 v6 highly breathable but also highly sensitive to abrasion in the toebox area.
The mesh fabric here is so thin and delicate that it was entirely blown by the touch of our Dremel.
After applying the tool's sandpaper tip for 12 seconds at a consistent speed (5K RPM) and force (3.2N), the sneaker ended up with a large see-through hole.
It is quite common for a breathable shoe to fall short of upper durability. But it doesn't mean you can't find exceptions that have both!
The New Balance 1906R, for example, is a rear case of both great ventilation and durability.
990 v6 | 2 |
Average | 3.8 |
Heel padding durability
Looking at the shoe's mesh inner lining, we didn't expect it to show better-than-average durability results.
After drilling the textile for 4 seconds at a 5K RPM speed, it showed some moderate wear and tear but nothing critical. Thus, we rated the shoe's heel padding durability with an average score of 3.
990 v6 | 3 |
Average | 3.2 |
Outsole hardness
If you are annoyed by the premature outsole wear on your trainers, the NB 990 v6 is about to turn that around.
This sneaker inherits the extra hard Ndurance rubber from its predecessors for a good reason. Measuring its precise firmness with a durometer, we got a reading of 89.0 HC. It is one of the hardest rubbers we've seen in lifestyle trainers.
And why does that matter? Harder materials tend to have better abrasion resistance as shown in our Dremel test below.
990 v6 | 89.0 HC |
Average | 85.4 HC |
Outsole durability
Forget about spilling your foot over the edge of a shoe. The 990 v6 comes with a wider-than-average platform in the heel too!
Our calliper measurement shows that the widest area of the heel measures 88.0 mm.
990 v6 | 1.0 mm |
Average | 1.1 mm |
Outsole thickness
Perhaps in an attempt to shave off some weight, New Balance went for a slightly thinner outsole in the 990 v6. But no need to worry, at 4.4 mm, it is thick enough to offer plenty of protection.
990 v6 | 4.4 mm |
Average | 5.4 mm |
Misc
Reflective elements
It looks like there are more reflective elements on the 990 v6 than there are on any of the previous editions. Front, side, and back - you stay visible from every angle!
990 v6 | Yes |
Tongue padding
Unlike the OG shoe, the more recent versions of the 990 (v6 included) come with pretty generous in-shoe padding.
Measuring the v6's tongue, our calliper showed 10.2 mm of thickness which is a bit puffier than average.
990 v6 | 10.2 mm |
Average | 9.1 mm |
Tongue: gusset type
The shoe's tongue is wide and well-padded which sort of eliminates the need for the gussets in the first place.
990 v6 | None |
Heel tab
Despite the absence of a pull tab, we found it easy to slide into the 990 v6. That is thanks to the shoe's collar shape.
990 v6 | None |
Removable insole
Need to wear a custom orthotic? This is not a problem at all as the shoe's stock insole can be removed in a second.
990 v6 | Yes |
Heel logo
On its official website, New Balance warns that the styles manufactured before summer 2023 have a flying NB logo on the heel (just like in our pair). However, shoes produced after that feature a flag emblem instead.
Don't get confused as you can might get either one.