Scarpa Rush TRK GTX review

We believe that the Scarpa Rush TRK GTX is an excellent choice for outdoor enthusiasts who need:

• a stable and supportive high-cut boot for multi-day thru-hikes
• a boot with deep lugs (4.0 mm) and solid grip to traverse wet or muddy trails
• a sealed waterproof boot that keeps the feet dry and warm

At £250, the Rush TRK GTX isn't quite as light on our wallet as it felt on our feet. We suggest checking out the Salomon Quest 4 GTX which is cheaper by £20 but is just as technical and supportive. It is also our long-standing top pick among backpacking boots. 

While the Scarpa Rush TRK GTX is a comfy boot for its kind, we found that it took a while before we fully unlocked its true potential. As an alternative that isn't so rigid and more comfortable for all-day wear, have a look at the Lowa Renegade GTX Mid.

The Rush TRK GTX is a chunky beast that boasts a 41.8 mm heel stack. This is notably higher than our current lab average which leaves us with plenty of protective foam and rubber underfoot. As a result, our landings felt safe as our heels were kept high above the trail hazards like sharp rocks and sticking roots.

The Rush TRK GTX almost entirely muted out any sense of the trail which really helped in staving off soreness and foot fatigue. That said, for hikers who prefer a more grounded boot when traversing difficult terrains, we suggest checking out the Scarpa Terra GTX as an alternative.

The forefoot, on the other hand, isn't quite as elevated. At 22.3 mm, the Rush TRK GTX's stack falls more in line with the average.

But that was still enough to protect our feet from impact or harsh objects underfoot while also giving us a fair amount of ground feel for intuitive toe-offs.

The difference in our stack measurements leaves us with a rather drastic offset of 18.5 mm.

This higher-than-average drop elevated our heels above the toes, maximising heel cushioning and ankle support.

We believe that most hikers with heavy backpacks will appreciate this setup on a multi-day hike because it engages foot and ankle muscles much less. This, in turn, helps to minimise fatigue in the long haul.

Plush cushioning doesn't make sense in a backpacking boot as it could do more harm than good. You need a firmer platform to rely on when navigating tricky terrain.

Pressing our durometer against the shoe's primary cushioning foam returned 29.6 HA. This is about 10% firmer than average but is on par with other backpacking boots we've tested in the lab.

But if the Scarpa Rush TRK is so firm, where does all that comfort and impact protection come from? The secret lies in the boot's dual-density midsole.

Those red inserts under the heels and balls of the foot are made of much softer foam, a whopping 74% softer, to be precise!

This component is a much-needed touch of responsiveness to the otherwise pretty unforgiving setup.

Gladly, that foam doesn't get much harder in cold conditions!

After keeping the Rush TRK GTX in the freezer for 20 minutes and retaking the durometer measurement, we recorded a mere 9.3% difference! It is notably lower than the average of hiking boots.

Another important component of the boot's underfoot experience is a well-padded insole.

Measuring its thickness with a calliper, we got 5.8 mm in the heel. This is similar to the other hiking boot insoles we've checked.

The Rush TRK GTX's toebox is quite spacious compared to the average hiking boot, measuring 104.3 mm wide at its widest point according to our calliper. As such, the Rush TRK GTX should comfortably accommodate most hikers, especially those prone to swelling during long hikes or those with broad feet. 

That said, this extra internal real estate isn't as suitable for narrow-footed hikers as their feet might shift around within the boot, especially during descents on uneven terrain. This can lead to discomfort and/or blisters so we highly recommend trying on the boot as sizing down might be necessary.

Alternatively, the La Sportiva Ultra Raptor II Mid GTX is a better option for those in need of a more snug and locked-in fit for their outdoor adventures. 

The Rush TRK GTX's toebox tapers quite significantly towards the big toe, becoming 78.8 mm wide in this part of the boot according to our caliper measurements. This is still on par with our current lab average and gives us a good amount of room to splay out without feeling too constricted within the boot. 

We were amazed at the incredible side-to-side containment of the Rush TRK GTX as well as the confidence it inspires for backpacking adventures on challenging terrain.

Coming from a brand that is obsessed with technical footwear for the mountains, this Scarpa boot has met all of our high-set expectations in terms of lateral support and stability.

The boot's ultra-rigid construction leaves no chance to ankle rolls. Attempting to twist it in our manual test, we felt no give whatsoever!

That was the easiest 5 out of 5 score for torsional rigidity this week!

The Rush TRK's high-cut collar, stiff upper, firm sole, and sturdy plastic DST (Dynamic Stabiliser Torsion) frame all created cast-like support that never once allowed our ankles to buckle.

The stiff and structured heel counter of the Scarpa Rush TRK GTX further enhanced a death grip around our heels and ankles.

On a 1-5 scale, where 5 is the stiffest heel counter among hiking boots, our manual push-and-squeeze test returned a clear 5!

But that's not all...

If you look at the boot's half-cut upper, you will see a bumpy area where the ankle bone sits inside the boot. That is Scarpa's so-called 3D Auto-fit Ankle Collar or moulded foam. It complements the boot's rigid heel collar with plush and padded support from inside the Rush TRK.

Compared to most other rugged backpacking boots, the Scarpa Rush TRK GTX has a rather moderate platform width.

It doesn't extend past the average, showing a typical 110.3 mm measurement on our calliper. For reference, the Salomon Quest 4 GTX comes in at 116.5 mm, and the Hoka Kaha 2 GTX showed 117.0 mm in the same area.

The heel portion of the Rush TRK GTX's sole does not go past the average either. The boot checked in at the standard 87.0 mm in the widest part of the heel.

We found that the boot's slimmer profile did not compromise stability at all but instead helped the Rush TRK shave off some bulk!

If you only approve of the stiffest boots for traversing rocky trails with a heavy load, the Scarpa Rush TRK GTX proved to be one of the least flexible options on our roster!

It takes 60% more force than average to bend this Scarpa boot to a 90-degree angle! Our force gauge returned 70.6 while the average hovers around 40-45N.

Even though the Scarpa Rush TRK GTX clocked in more ounces than the average hiking boot, we deem its weight as reasonable for a backpacking boot.

Our scale recorded 20.0 oz (567g) in a men's US size 9 which is on par with the brand's other boots like the Scarpa Terra GTX and the Scarpa Boreas GTX.

For the amount of technologies and high-quality materials packed into the Rush TRK, we consider its weight to be fair.

Having a Gore-Tex membrane normally doesn't bode well for breathability. A boot's ability to keep water from penetrating its interiors usually means that it's pretty airtight too.

As our smoke test shows, this is clearly the case with the Rush TRK GTX. Not even a wisp of smoke managed to escape the boot's upper throughout the 10-second test. 

The KEEN NXIS Speed's airy mesh upper, on the other hand, is much better suited for hot days.

The boot's well-insulated nature was further confirmed upon inspecting a backlit cross-section of the upper. We saw that it entirely blocked out the light below! Apparently, there are no potential areas for heat to escape the boot. 

The toastiness of the Rush TRK GTX can't be attributed solely to the Gore-Tex lining, however, as its upper is made of solid suede and leather overlays with no gaps in the materials for ventilation.

While this isn't ideal for hot summer hikes, it does mean that frost-bitten toes were the least of our concerns while testing this boot in more frigid conditions. 

For what it lacks in breathability, the Rush TRK GTX's suede toebox turns out to be extremely tough.

We tested this with our Dremel which was set against the unprotected part of the boot's toebox with 3.2N of force spinning at 5K RPM. 

After 12 seconds of grinding, the Rush TRK GTX was left with a barely noticeable scuff at the point of contact. This excellent performance led us to give the Rush TRK GTX a perfect toebox durability score of 5 out of 5!

Add to that the boot's tough toe rand and you need not worry about any bumps or scrapes ruining the integrity of the toebox, even when traversing rough-and-ready terrains. 

Next, we turn our attention to another potentially vulnerable portion of the boot - the heel collar lining.

But to our amazement, the Rush TRK GTX nailed our durability test even in such a delicate part of the upper!

Looking as if it was never touched with sandpaper, the boot's inner lining earned the highest durability score from us - 5 out of 5!

The Rush TRK GTX features Scarpa's proprietary PRESA compound in the outsole, Even though it's not the industry-leading Vibram rubber, it showed pretty solid results in our durability tests.

First of all, this rubber compound is hard. And that is usually synonymous with hard-wearing.

When we pressed our Shore C durometer against the boot's outsole, the tool recorded a high reading of 90.0 HC. It is even a touch harder than the average.

In our next step, we felt hard on the rubber by setting our Dremel speed to 10K RPM and holding sandpaper against one of the lugs for 22 seconds.

Given Scarpa's stellar reputation for durability, we weren't even surprised with the result. Our tread gauge measured a shallow 0.9 mm indentation in the boot's outsole.

This confirmed our initial assumptions of the boot's potentially long shelf life.

We also found the amount of rubber at the bottom of the Scarpa Rush TRK GTX to be sufficient for a backpacking boot.

With a calliper measurement of 2.3 mm (excluding the 4.0 mm lugs), this Scarpa boot promises a good while before it starts to lose integrity.

The Scarpa Rush TRK GTX is studded with deep 4.0 mm lugs which proved its effectiveness in the most demanding trail conditions.

Hiking on rocky paths and gravel, squelching through mud, and stepping on moss-covered logs all felt very secure thanks to the boot's grippy outsole.

The Rush TRK GTX doesn't feature any reflective elements in its construction. We, therefore, recommend using additional high-vis gear for better night-time visibility in situations where it is required. 

Using our calliper, we measured the Rush TRK GTX's tongue to be 9.5 mm thick. While this is a little shy of our current lab average, it still leaves us with plenty of a buffer between our feet and the laces.

As such, it feels very comfortable across our instep, with lace bite never being an issue during our test hikes no matter how tightly we cinched up the boot. 

As is typically the case with waterproof hiking boots, the Rush TRK GTX's tongue is fully gusseted on both sides. Not only does this prevent water from seeping in, but it also protects our feet from any bits of grit or debris that might make their way into the boot. 

The Rush TRK GTX has a convenient finger loop at the heel that makes sliding the boot on feel a little quicker and smoother. 

The insole isn't glued in so replacing it with an aftermarket alternative or a custom orthotic is possible if necessary.