Facts
-
Use
Workout
Shoes with optimum cushioning, lateral support, and flexibility for daily workouts and studio sessions. See workout shoes
CrossFit
Versatile, low-profile shoes for constantly varied exercises including plyometrics, sprinting, weightlifting, and rope climbing. See CrossFit shoes
Weightlifting
Heavy-duty shoes with a wedge and an elevated heel that create a sturdy platform and promote ankle mobility. See weightlifting shoes
Walking
Shoes for daily wear that ensure a smooth walking gait cycle. Check out walking shoes
-
Arch support
Neutral
For people with normal pronation. Also provide support for high-arched feet with underpronation (excessive outward rolling of the foot). See neutral training shoes
Stability
For people with low-arched or flat feet and moderate overpronation (excessive inward rolling of the foot). See stability training shoes
Motion control
Shoes feature stabilizing technologies for people with severe overpronation. See motion control training shoes
Good to know
Stability and motion control add-ons are uncommon for workout shoes and are never present in CrossFit or weightlifting footwear. They are mostly found in walking shoes where the gait is easier to correct.
-
Price$80
-
WidthMen: NormalWomen: Normal
-
Release dateUnknown
Summary
We spent 7 hours reading reviews from experts and users. In summary, this is what training geeks think:
3 reasons to buy
- Many users agreed that the Reebok Cloudride DMX 3.0 was comfortable for casual wear.
- It felt light and soft on the foot, according to most reviewers.
- A number of buyers considered it to be a quality shoe for a reasonable price.
4 reasons not to buy
- Some purchasers complained that the footwear ran smaller than they expected.
- A handful of people found that the shoe fit too narrow.
- It lacked support and felt unstable, according to several wearers.
- A few users griped about the rubber ball in the heel portion of the sole; it pushed the foot to slide forward, putting pressure on toes.
Bottom line
The Reebok Cloudride DMX 3.0 was lauded as a cozy and lightweight shoe for daily wear. The buyers also appreciated the quality-price ratio of the product. However, a considerable number of users were not able to benefit form the trainer because it fit too small and narrow. Some people also disfavored the “rubber ball” in the heel section of the sole.
Rankings
Updates to Reebok CloudRide DMX 3.0
- The Reebok Cloudride DMX 3.0 is a new iteration of the brand’s walking shoe series. It was created to accompany the wearer in daily walks and running errands. The model retains the proprietary DMX Flex “moving air” technology and the Memory Tech sockliner for continuous cushioning.
- The mesh material has been revamped to offer a more sock-like fit. Its design still serves to keep the foot aerated.
- The supporting overlay at the back has also been altered. It is now thicker and placed closer to the heel to prevent the rearfoot from wobbling.
- A pull tab has been added at the heel. It allows for a smoother on-and-off wear.
Reebok CloudRide DMX 3.0 size and fit
The Reebok Cloudride DMX 3.0 comes in both men’s and women’s versions. Lengthwise, the shoe tends to run on the small side, so it might be necessary to go half-a-size to a full size bigger. The Size Chart on the brand’s website assists in finding the right size for one’s foot measurements. In terms of width, the footwear is available in B - Medium for women and in D - Medium for men. Based on users’ feedback, the model runs a bit narrow.
Outsole
The Cloudride DMX 3.0 employs rubber to protect the platform from abrasion. It has a low-profile lug pattern which ensures traction and slip resistance on various outdoor surfaces.
Deep flex grooves are present in the forefoot. They make sure that the platform is pliable enough to accommodate the natural bending of the walking foot.
Midsole
The shoe utilizes Reebok’s patented DMX Flex technology. As the foot goes through the walking gait cycle, this component squeezes and transfers air from the heel to the forefoot to create customized cushioning.
The DMX works together with the Memory Tech sockliner. It adapts to the shape of the wearer’s foot, contributing to the cloud-like underfoot experience.
Upper
The Reebok Cloudride DMX 3.0 uses a one-piece mesh upper to hug the foot in a soft and supportive way. The mesh material on the men’s version is knitted, while the texture on the women’s model resembles jacquard.
A thick synthetic reinforcement is added at the heel. It extends to cradle both lateral and medial sides to keep the rearfoot in place, preventing wobbling and slippage.
The footwear makes use of the low-cut design. It leaves space for the ankle to move freely and make quick transitions.
A conventional lace-up closure secures the midfoot. The flat laces assist in a faster and smoother adjustment and are not supposed to get untied easily.
