Our verdict

85
Great
  • Daily running 90
  • Tempo 51
  • Race 34
  • Stability 83
ASICS proved with the Dynablast 5 that turning an older Novablast design into a more affordable shoe works, and the Dynablast 6 doubles down on that formula. In our lab tests, we found a massive improvement in traction, along with better comfort and stability. We also liked how it brings back the familiar design of the Novablast 4 at a lower price. Unfortunately, we were disappointed by the weak energy return, and the increased stiffness won't please everyone. Nonetheless, the Dynablast 6 is one of the strongest value-focused maximalist trainers available right now.

Pros

  • Generous cushioning protects joints
  • More spacious than version 5
  • Very affordable for a max-stack shoe
  • Balanced drop works for all footstrikes
  • Incredible outsole grip
  • Impressive fit with semi-gusseted tongue
  • Very stable for being a neutral shoe
  • Rockered forefoot creates smooth transitions
  • Ideal for daily runs
  • Extra tongue padding

Cons

  • Limited energy return
  • Maybe a bit too stiff
  • High stack may overwhelm beginners
  • Heavier than before

Who should buy

The ASICS Dynablast 6 is a very interesting pick for:

  • Runners who loved the ASICS Novablast 4 and want a very similar shoe at a lower price.
  • Those who prefer maximalist running shoes but don't want to pay premium prices.
  • Beginners and casual runners looking for a dependable, durable daily trainer.

ASICS Dynablast 6 side

Who should NOT buy

The Dynablast 6 isn't the best choice for runners who dislike stiff shoes. We also think its rigid construction makes it less appealing for everyday wear if you prefer a shoe that flexes naturally with your foot. Instead, consider the Brooks Revel 9 for a more balanced ride or the Altra Experience Flow 3 if flexibility is your priority.

We also believe the Dynablast 6's high stack may be excessive for some runners, especially beginners who prefer a more grounded feel. In that case, the New Balance Fresh Foam 680 v9 offers a more moderate stack height for daily runs.

ASICS Dynablast 6 parts

Cushioning

Shock absorption

The ASICS Dynablast 6 kicks off our testing with a respectable 137 SA in the heel, although that's a 12% decrease from the previous generation. Those who loved the outstanding heel impact protection of the Dynablast 5 should be aware of this.

We were happier with the 125 SA recorded in the forefoot, which almost matches its predecessor and comfortably exceeds the average for this part of the shoe.

ASICS Dynablast 6 Shock absorption heel
Heel
Forefoot
Test results
Dynablast 6 137 SA
Category average 132 SA
Compared to 425 running shoes
Number of shoes
24 SA
Shock absorption
184 SA

Energy return

We obtained 52.3% energy return in the forefoot and a very disappointing 45.7% in the heel.

We're looking at an 11% reduction in forefoot energy return and a 15% decline at the rear compared to version 5. Even at this price point, we were hoping for more from FF Blast+. For us, this is clearly a shoe limited to cruising at easy paces.

Forefoot
Heel
Test results
Dynablast 6 52.3%
Category average 61.5%
Compared to 422 running shoes
Number of shoes
38.0%
Energy return
83.0%

Heel stack

One of the things we love about this series is that you no longer need to spend a fortune to get a maximalist shoe.

ASICS Dynablast 6 side medial

We measured 40.1 mm at the heel, very close to the 41 mm listed by the brand. And just look at the huge block of foam underneath the rearfoot in our cut-in-half shoe!

ASICS Dynablast 6 Heel stack
Test results
Dynablast 6 (lab) 40.1 mm
Dynablast 6 (brand claim) 41.0 mm
Category average 35.6 mm
Compared to 492 running shoes
Number of shoes
7.6 mm
Heel stack
50.1 mm

Forefoot stack

The stack height at the forefoot grew by 4% compared to its predecessor, reaching 33.1 mm in our lab. That matches the 33 mm listed by ASICS almost perfectly.

With that much material under the ball of the foot, there's a considerable buffer between the foot and the asphalt. This makes the Dynablast 6 particularly appealing to heavier midfoot and forefoot strikers who prefer a high-stack shoe for daily runs.

ASICS Dynablast 6 Forefoot stack
Test results
Dynablast 6 (lab) 33.1 mm
Dynablast 6 (brand claim) 33.0 mm
Category average 27.2 mm
Compared to 492 running shoes
Number of shoes
7.6 mm
Forefoot stack
41.3 mm

Drop

Although ASICS states an 8 mm drop, we got 7.0 mm from our measurements.

It's a minor discrepancy and still puts the shoe in that sweet spot between flat, low-drop designs and the heavily elevated heels found in some daily trainers. In our opinion, this geometry will accommodate a wide range of footstrikes.

ASICS Dynablast 6 Drop
Test results
Dynablast 6 (lab) 7.0 mm
Dynablast 6 (brand claim) 8.0 mm
Category average 8.4 mm
Compared to 492 running shoes
Number of shoes
-0.8 mm
Drop
15.6 mm

Midsole softness

Note: Low measurement: softer. High measurement: firmer.

ASICS sticks to FF Blast+, its blend of EVA and OBC, in a single layer that runs the length of the shoe. We measured 36.5 AC, virtually the same softness as version 5, offering a balanced amount of give underfoot without being particularly plush.

In our freezer test, the foam became 18% firmer after spending 20 minutes next to our ice creams. We think that's a solid result for an affordable, EVA-based midsole.

ASICS Dynablast 6 Midsole softness
Room temp
In cold
Test results
Dynablast 6 36.5 AC
Category average 35.5 AC
Compared to 275 running shoes
Number of shoes
8.8 AC
Soft ←→ Firm
75.2 AC

Rocker

As we mentioned earlier, ASICS followed the same approach with the Dynablast 6 as it did with version 5: borrowing the midsole design from a Novablast model two generations older. This time, ASICS replicated the rocker geometry of the Novablast 4, which is slightly more pronounced than that of the Novablast 3.

ASICS Dynablast 6 Rocker

Size and fit

Size

Owners of this shoe, how does it fit?

1 size small ½ size small True to size ½ size large 1 size large

Internal length

Note: Our testing shows that internal length is not a great measure of fit. But, as many users have requested this specific test, we've decided to add it for those interested.
ASICS Dynablast 6 Internal length
Test results
Dynablast 6 273.6 mm
Category average 269.3 mm
Compared to 311 running shoes
Number of shoes
256.0 mm
Internal length
280.4 mm

Width / Fit

ASICS made some welcome room in the forefoot with the Dynablast 6. Our gel mold revealed 97.3 mm at its widest point, giving the ball of the foot a little more space than in the outgoing model.

It's a good fit for runners with average-width feet who dislike a race-like squeeze across the forefoot.

ASICS Dynablast 6 Width / Fit
Test results
Dynablast 6 97.3 mm
Category average 95.2 mm
Compared to 371 running shoes
Number of shoes
87.7 mm
Width / Fit
102.4 mm

Toebox width

We also noticed a change near the big toe, where the previous generation was less accommodating. At 74.2 mm, the new mold is 4% wider in this area.

The toebox still has a conventional taper, but there's a bit more room for the toes to spread, especially welcome during longer runs.

ASICS Dynablast 6 Toebox width
Test results
Dynablast 6 74.2 mm
Category average 73.2 mm
Compared to 371 running shoes
Number of shoes
65.9 mm
Toebox width
85.0 mm

Toebox height

The height of the toebox has also increased, going up by 8% to 25.3 mm.

The extra space is welcome, as the previous version was particularly restrictive in this dimension. Nevertheless, the mesh still sits a little lower than we'd like for runners who enjoy wiggling their toes freely. Those who need lots of vertical room above their toes should keep this in mind.

ASICS Dynablast 6 Toebox height
Test results
Dynablast 6 25.3 mm
Category average 27.0 mm
Compared to 371 running shoes
Number of shoes
17.9 mm
Toebox height
34.3 mm

Traction / Grip

Traction test

We didn't expect traction to be one of the best things about the ASICS Dynablast 6, but it scored a fantastic 0.88 in our test thanks to the new AHAR LO outsole.

That's an 87% jump over the Dynablast 5, which managed just 0.47. For runners who train all year and want to feel confident through corners or on rainy days, this improvement alone makes a compelling case for choosing the latest version.

Test results
Dynablast 6 0.88
Category average 0.53
Compared to 415 running shoes
Number of shoes
0.11
Forefoot traction
1.05

Outsole design

The orange AHAR LO rubber features the familiar angular tread pattern from the Novablast 4, including a separate central pod under the forefoot. ASICS designed this part of the midsole to act like a trampoline and provide bounce at toe-off.

There's rubber along both edges of the shoe, separated by a deep channel in the rearfoot. That leaves some foam exposed while placing the wear-resistant AHAR LO rubber where most runners make contact with the ground.

ASICS Dynablast 6 Outsole design AHAR LO

Flexibility / Stiffness

Despite having no plate, the shoe required 17.3N in our 30-degree bend test, a 19% increase from its predecessor. It's not an especially flexible daily trainer anymore.

This works nicely with the curved forefoot for those who enjoy rolling from one stride into the next. However, if you also want to use this shoe in the gym and like the sole to bend easily under your toes, there are better options.

ASICS Dynablast 6 Flexibility / Stiffness
Test results
Dynablast 6 17.3N
Category average 15.6N
Compared to 419 running shoes
Number of shoes
0.8N
Flexible ←→ Stiff
38.5N

Weight

The men's US 9 that we bought tipped the scale at 9.6 oz (272g), a little lighter than the weight listed by ASICS.

On the other hand, this comes with a 3% weight increase over version 5. That's hardly a dealbreaker for a daily trainer, but it's still a step in the wrong direction.

ASICS Dynablast 6 Weight
Test results
Dynablast 6 (lab) 9.6 oz (272g)
Dynablast 6 (brand claim) 9.7 oz (276g)
Category average 9.2 oz (260g)
Compared to 492 running shoes
Number of shoes
3.5 oz (99g)
Weight
15.0 oz (424g)

Stability

Lateral stability test

We found a lot to like about the stability of the Dynablast 6. The midsole extends beyond the foot, and the heel counter offers plenty of structure at the rear.

Obviously, it's still a neutral shoe, with no dedicated pronation-control system. We believe that this is a particularly appealing geometry for those who want a more secure platform as their stride becomes less consistent toward the end of a long run.

Torsional rigidity

It took 16.7 Nm of torque to twist the shoe in our lab, a noticeably above-average result that reinforces the Dynablast 6's character as a torsionally rigid daily trainer rather than a highly-flexible one.

ASICS Dynablast 6 Torsional rigidity
Test results
Dynablast 6 16.7 Nm
Category average 14.4 Nm
Compared to 178 running shoes
Number of shoes
3.4 Nm
Flexible ←→ Rigid
22.5 Nm

Heel counter stiffness

The heel counter put up quite a fight in our manual assessment, scoring 4/5.

This level of rigidity helps hold the rearfoot in place, which is particularly useful for heel strikers who value a more structured feel. However, runners who dislike stiff heel cups may prefer a shoe with a 2/5 or 3/5 construction back here.

Test results
Dynablast 6 4
Category average 3
Compared to 487 running shoes
Number of shoes
1
Heel counter stiffness
5

Midsole width - forefoot

We got a whopping 125.1 mm at the forefoot, which is 6% wider than the already generous platform of its predecessor. That's the kind of width we often find in stability shoes!

This gives forefoot strikers a large landing surface with extra material on either side of the foot. Of course, that's also why the silhouette looks quite chunky from above.

ASICS Dynablast 6 Midsole width - forefoot
Test results
Dynablast 6 125.1 mm
Category average 115.2 mm
Compared to 492 running shoes
Number of shoes
100.5 mm
Midsole width - forefoot
129.8 mm

Midsole width - heel

The extra width extends to the other end of the shoe too, where we measured 95.8 mm, another 6% increase over version 5. It's a welcome change for heel strikers that need just a tiny bit of support, as the landing area now extends farther to each side of the heel.

ASICS Dynablast 6 Midsole width - heel
Test results
Dynablast 6 95.8 mm
Category average 91.1 mm
Compared to 492 running shoes
Number of shoes
67.1 mm
Midsole width - heel
112.3 mm

Durability

Toebox durability

The new mesh earned 3/5 in our Dremel test, a decent result but a step back from the 4/5 achieved by its predecessor.

Test results
Dynablast 6 3
Category average 2.6
Compared to 445 running shoes
Number of shoes
1
Toebox durability
5

Heel padding durability

We gave the heel lining a perfect 5/5 after attacking it with our Dremel. That's reassuring for a shoe intended to be worn day after day for running and casual wear, and particularly good news for those who often find the inside of their heel collar wearing out before the rest of the shoe.

Test results
Dynablast 6 5
Category average 3.4
Compared to 442 running shoes
Number of shoes
1
Heel padding durability
5

Outsole durability

The rubber impressed us once again when we moved on to abrasion resistance. Our Dremel test left an indentation of just 0.6 mm, meaning there was 25% less wear than in our test of the Dynablast 5.

Test results
Dynablast 6 0.6 mm
Category average 1.1 mm
Compared to 432 running shoes
Number of shoes
0.0 mm
Outsole wear (Good ←→ Bad)
2.0 mm

Outsole thickness

At 3.5 mm, the AHAR LO rubber has plenty of material to wear through in covered areas. ASICS didn't try to shave weight by drastically thinning the outsole, a decision that probably makes sense in a shoe that many runners will use for everything from daily wear to their long Sunday runs.

ASICS Dynablast 6 Outsole thickness
Test results
Dynablast 6 3.5 mm
Category average 3.1 mm
Compared to 488 running shoes
Number of shoes
0.0 mm
Outsole thickness
8.4 mm

Comfort

Breathability

ASICS introduced a new engineered mesh, but it took a step backward in our smoke test, scoring 3/5 compared to the 4/5 achieved by its predecessor.

Our microscope reveals tiny openings between the closely packed bundles of blue yarn. The gaps are just big enough to facilitate some airflow, and we think most runners will be fine with this ventilation outside of particularly hot summer days.

ASICS Dynablast 6 microscope

Test results
Dynablast 6 3
Category average 3.6
Compared to 467 running shoes
Number of shoes
1
Breathability
5

Tongue padding

The lacing system of the Dynablast 6 combines flat laces with cord loops over the forefoot and punched eyelets closer to the ankle. We appreciate the extra top eyelet for a runner's knot, and the long loops distribute the lace tension over a broader part of the upper.

ASICS Dynablast 6 tongue

We also measured 5.9 mm of tongue padding, making it 51% thicker than last year's tongue. If you like to lace your shoes quite tightly, there's now a welcome cushion between the laces and the instep.

ASICS Dynablast 6 Tongue padding
Test results
Dynablast 6 5.9 mm
Category average 5.8 mm
Compared to 491 running shoes
Number of shoes
0.4 mm
Tongue padding
14.0 mm

Tongue: gusset type

We're glad that ASICS retained the semi-gusseted tongue. It's attached to the upper on both sides by sections of fabric, helping keep it in place during the run.

ASICS Dynablast 6 Tongue: gusset type
Test results
Dynablast 6 Both sides (semi)

Insole thickness

The OrthoLite insole measures 4.7 mm according to our calipers.

ASICS Dynablast 6 Insole thickness
Test results
Dynablast 6 4.7 mm
Category average 4.4 mm
Compared to 486 running shoes
Number of shoes
1.7 mm
Insole thickness
8.8 mm

Removable insole

We had no problems lifting the insole out of the shoe. That means you can easily swap it out if you run with custom orthotics or have a footbed you particularly like. Just consider the available vertical space in the toebox before choosing a significantly thicker replacement.

ASICS Dynablast 6 Removable insole
Test results
Dynablast 6 Yes

Heel tab

ASICS went with the same extended heel collar found in the previous version. The upper curves up and away from the Achilles, giving us enough fabric to grab while putting the shoe on.

ASICS Dynablast 6 Heel tab
Test results
Dynablast 6 Extended heel collar

Misc

Reflective elements

Despite the flashy orange detailing of our colorway, we couldn't find any reflective material on the upper. We would have liked at least a small reflective strip on the heel.

ASICS Dynablast 6 Reflective elements
Test results
Dynablast 6 No

Price

The ASICS Dynablast 6 keeps the same MSRP as its predecessor, and we think the approach of borrowing the design from an older Novablast makes a lot of sense for this series and helps to cut production costs.

You get a substantial amount of cushioning, a stable platform, and now a seriously impressive outsole without moving into premium price territory. The lack of energy return holds it back a bit, but for those who prioritize reliable daily mileage, we find the price particularly attractive.

Test results
Dynablast 6 $120
Category average $158
Compared to 492 running shoes
Number of shoes
$20
Price
$500