Nuestra conclusión
- Tiradas diarias / rodajes 90
- Tempo 51
- Competición 34
- Estabilidad 83
Pros
- Generous cushioning protects joints
- More spacious than version 5
- Very affordable for a max-stack shoe
- Balanced drop works for all footstrikes
- Incredible outsole grip
- Impressive fit with semi-gusseted tongue
- Very stable for being a neutral shoe
- Rockered forefoot creates smooth transitions
- Ideal for daily runs
- Extra tongue padding
Contras
- Limited energy return
- Maybe a bit too stiff
- High stack may overwhelm beginners
- Heavier than before
Who should buy
The ASICS Dynablast 6 is a very interesting pick for:
- Runners who loved the ASICS Novablast 4 and want a very similar shoe at a lower price.
- Those who prefer maximalist running shoes but don't want to pay premium prices.
- Beginners and casual runners looking for a dependable, durable daily trainer.

Who should NOT buy
The Dynablast 6 isn't the best choice for runners who dislike stiff shoes. We also think its rigid construction makes it less appealing for everyday wear if you prefer a shoe that flexes naturally with your foot. Instead, consider the Brooks Revel 9 for a more balanced ride or the Altra Experience Flow 3 if flexibility is your priority.
We also believe the Dynablast 6's high stack may be excessive for some runners, especially beginners who prefer a more grounded feel. In that case, the New Balance Fresh Foam 680 v9 offers a more moderate stack height for daily runs.

Amortiguación
Shock absorption
The ASICS Dynablast 6 kicks off our testing with a respectable 137 SA in the heel, although that's a 12% decrease from the previous generation. Those who loved the outstanding heel impact protection of the Dynablast 5 should be aware of this.
We were happier with the 125 SA recorded in the forefoot, which almost matches its predecessor and comfortably exceeds the average for this part of the shoe.

| Dynablast 6 | 137 SA |
| Media de la categoría | 132 SA |
Energy return
We obtained 52.3% energy return in the forefoot and a very disappointing 45.7% in the heel.
We're looking at an 11% reduction in forefoot energy return and a 15% decline at the rear compared to version 5. Even at this price point, we were hoping for more from FF Blast+. For us, this is clearly a shoe limited to cruising at easy paces.
| Dynablast 6 | 52.3% |
| Media de la categoría | 61.5% |
Altura de la suela en la zona del talón
One of the things we love about this series is that you no longer need to spend a fortune to get a maximalist shoe.

We measured 40.1 mm at the heel, very close to the 41 mm listed by the brand. And just look at the huge block of foam underneath the rearfoot in our cut-in-half shoe!

| Dynablast 6 Medición de laboratorio | 40.1 mm |
| Dynablast 6 Datos de la marca | 41.0 mm |
| Media de la categoría | 35.6 mm |
Altura de la suela en el antepié
The stack height at the forefoot grew by 4% compared to its predecessor, reaching 33.1 mm in our lab. That matches the 33 mm listed by ASICS almost perfectly.
With that much material under the ball of the foot, there's a considerable buffer between the foot and the asphalt. This makes the Dynablast 6 particularly appealing to heavier midfoot and forefoot strikers who prefer a high-stack shoe for daily runs.

| Dynablast 6 Medición de laboratorio | 33.1 mm |
| Dynablast 6 Datos de la marca | 33.0 mm |
| Media de la categoría | 27.2 mm |
Drop
Although ASICS states an 8 mm drop, we got 7.0 mm from our measurements.
It's a minor discrepancy and still puts the shoe in that sweet spot between flat, low-drop designs and the heavily elevated heels found in some daily trainers. In our opinion, this geometry will accommodate a wide range of footstrikes.

| Dynablast 6 Medición de laboratorio | 7.0 mm |
| Dynablast 6 Datos de la marca | 8.0 mm |
| Media de la categoría | 8.4 mm |
Dureza de la mediasuela
ASICS sticks to FF Blast+, its blend of EVA and OBC, in a single layer that runs the length of the shoe. We measured 36.5 AC, virtually the same softness as version 5, offering a balanced amount of give underfoot without being particularly plush.
In our freezer test, the foam became 18% firmer after spending 20 minutes next to our ice creams. We think that's a solid result for an affordable, EVA-based midsole.

| Dynablast 6 | 36.5 AC |
| Media de la categoría | 35.5 AC |
Rocker
As we mentioned earlier, ASICS followed the same approach with the Dynablast 6 as it did with version 5: borrowing the midsole design from a Novablast model two generations older. This time, ASICS replicated the rocker geometry of the Novablast 4, which is slightly more pronounced than that of the Novablast 3.

Tallaje y ajuste
Talla
Longitud interna

| Dynablast 6 | 273.6 mm |
| Media de la categoría | 269.3 mm |
Anchura / Ajuste
ASICS made some welcome room in the forefoot with the Dynablast 6. Our gel mold revealed 97.3 mm at its widest point, giving the ball of the foot a little more space than in the outgoing model.
It's a good fit for runners with average-width feet who dislike a race-like squeeze across the forefoot.

| Dynablast 6 | 97.3 mm |
| Media de la categoría | 95.2 mm |
Anchura de la parte delantera
We also noticed a change near the big toe, where the previous generation was less accommodating. At 74.2 mm, the new mold is 4% wider in this area.
The toebox still has a conventional taper, but there's a bit more room for the toes to spread, especially welcome during longer runs.

| Dynablast 6 | 74.2 mm |
| Media de la categoría | 73.2 mm |
Altura de la parte delantera
The height of the toebox has also increased, going up by 8% to 25.3 mm.
The extra space is welcome, as the previous version was particularly restrictive in this dimension. Nevertheless, the mesh still sits a little lower than we'd like for runners who enjoy wiggling their toes freely. Those who need lots of vertical room above their toes should keep this in mind.

| Dynablast 6 | 25.3 mm |
| Media de la categoría | 27.0 mm |
Tracción / Agarre
Traction test
We didn't expect traction to be one of the best things about the ASICS Dynablast 6, but it scored a fantastic 0.88 in our test thanks to the new AHAR LO outsole.
That's an 87% jump over the Dynablast 5, which managed just 0.47. For runners who train all year and want to feel confident through corners or on rainy days, this improvement alone makes a compelling case for choosing the latest version.
| Dynablast 6 | 0.88 |
| Media de la categoría | 0.53 |
Diseño de la suela exterior
The orange AHAR LO rubber features the familiar angular tread pattern from the Novablast 4, including a separate central pod under the forefoot. ASICS designed this part of the midsole to act like a trampoline and provide bounce at toe-off.
There's rubber along both edges of the shoe, separated by a deep channel in the rearfoot. That leaves some foam exposed while placing the wear-resistant AHAR LO rubber where most runners make contact with the ground.

Flexibilidad / Rigidez
Despite having no plate, the shoe required 17.3N in our 30-degree bend test, a 19% increase from its predecessor. It's not an especially flexible daily trainer anymore.
This works nicely with the curved forefoot for those who enjoy rolling from one stride into the next. However, if you also want to use this shoe in the gym and like the sole to bend easily under your toes, there are better options.

| Dynablast 6 | 17.3N |
| Media de la categoría | 15.6N |
Peso
The men's US 9 that we bought tipped the scale at 9.6 oz (272g), a little lighter than the weight listed by ASICS.
On the other hand, this comes with a 3% weight increase over version 5. That's hardly a dealbreaker for a daily trainer, but it's still a step in the wrong direction.

| Dynablast 6 Medición de laboratorio | 9.6 oz (272g) |
| Dynablast 6 Datos de la marca | 9.7 oz (276g) |
| Media de la categoría | 9.2 oz (260g) |
Estabilidad
Prueba de estabilidad lateral
We found a lot to like about the stability of the Dynablast 6. The midsole extends beyond the foot, and the heel counter offers plenty of structure at the rear.
Obviously, it's still a neutral shoe, with no dedicated pronation-control system. We believe that this is a particularly appealing geometry for those who want a more secure platform as their stride becomes less consistent toward the end of a long run.
Rigidez torsional
It took 16.7 Nm of torque to twist the shoe in our lab, a noticeably above-average result that reinforces the Dynablast 6's character as a torsionally rigid daily trainer rather than a highly-flexible one.

| Dynablast 6 | 16.7 Nm |
| Media de la categoría | 14.4 Nm |
Rigidez del contrafuerte del talón
The heel counter put up quite a fight in our manual assessment, scoring 4/5.
This level of rigidity helps hold the rearfoot in place, which is particularly useful for heel strikers who value a more structured feel. However, runners who dislike stiff heel cups may prefer a shoe with a 2/5 or 3/5 construction back here.
| Dynablast 6 | 4 |
| Media de la categoría | 3 |
Anchura de la mediasuela - antepié
We got a whopping 125.1 mm at the forefoot, which is 6% wider than the already generous platform of its predecessor. That's the kind of width we often find in stability shoes!
This gives forefoot strikers a large landing surface with extra material on either side of the foot. Of course, that's also why the silhouette looks quite chunky from above.

| Dynablast 6 | 125.1 mm |
| Media de la categoría | 115.2 mm |
Anchura de la mediasuela - talón
The extra width extends to the other end of the shoe too, where we measured 95.8 mm, another 6% increase over version 5. It's a welcome change for heel strikers that need just a tiny bit of support, as the landing area now extends farther to each side of the heel.

| Dynablast 6 | 95.8 mm |
| Media de la categoría | 91.1 mm |
Durabilidad
Durabilidad de la parte delantera
The new mesh earned 3/5 in our Dremel test, a decent result but a step back from the 4/5 achieved by its predecessor.
| Dynablast 6 | 3 |
| Media de la categoría | 2.6 |
Durabilidad del acolchado del talón
We gave the heel lining a perfect 5/5 after attacking it with our Dremel. That's reassuring for a shoe intended to be worn day after day for running and casual wear, and particularly good news for those who often find the inside of their heel collar wearing out before the rest of the shoe.
| Dynablast 6 | 5 |
| Media de la categoría | 3.4 |
Durabilidad de la suela
The rubber impressed us once again when we moved on to abrasion resistance. Our Dremel test left an indentation of just 0.6 mm, meaning there was 25% less wear than in our test of the Dynablast 5.
| Dynablast 6 | 0.6 mm |
| Media de la categoría | 1.1 mm |
Grosor de la suela
At 3.5 mm, the AHAR LO rubber has plenty of material to wear through in covered areas. ASICS didn't try to shave weight by drastically thinning the outsole, a decision that probably makes sense in a shoe that many runners will use for everything from daily wear to their long Sunday runs.

| Dynablast 6 | 3.5 mm |
| Media de la categoría | 3.1 mm |
Comodidad
Breathability
ASICS introduced a new engineered mesh, but it took a step backward in our smoke test, scoring 3/5 compared to the 4/5 achieved by its predecessor.
Our microscope reveals tiny openings between the closely packed bundles of blue yarn. The gaps are just big enough to facilitate some airflow, and we think most runners will be fine with this ventilation outside of particularly hot summer days.

| Dynablast 6 | 3 |
| Media de la categoría | 3.6 |
Acolchado de la lengüeta
The lacing system of the Dynablast 6 combines flat laces with cord loops over the forefoot and punched eyelets closer to the ankle. We appreciate the extra top eyelet for a runner's knot, and the long loops distribute the lace tension over a broader part of the upper.

We also measured 5.9 mm of tongue padding, making it 51% thicker than last year's tongue. If you like to lace your shoes quite tightly, there's now a welcome cushion between the laces and the instep.

| Dynablast 6 | 5.9 mm |
| Media de la categoría | 5.8 mm |
Lengüeta: tipo de refuerzo
We're glad that ASICS retained the semi-gusseted tongue. It's attached to the upper on both sides by sections of fabric, helping keep it in place during the run.

| Dynablast 6 | Ambos lados (semi) |
Grosor de la plantilla
The OrthoLite insole measures 4.7 mm according to our calipers.

| Dynablast 6 | 4.7 mm |
| Media de la categoría | 4.4 mm |
Plantilla extraíble
We had no problems lifting the insole out of the shoe. That means you can easily swap it out if you run with custom orthotics or have a footbed you particularly like. Just consider the available vertical space in the toebox before choosing a significantly thicker replacement.

| Dynablast 6 | Sí |
Tirador del talón
ASICS went with the same extended heel collar found in the previous version. The upper curves up and away from the Achilles, giving us enough fabric to grab while putting the shoe on.

| Dynablast 6 | Talón extendido |
Varios
Elementos reflectantes
Despite the flashy orange detailing of our colorway, we couldn't find any reflective material on the upper. We would have liked at least a small reflective strip on the heel.

| Dynablast 6 | No |
Precio
The ASICS Dynablast 6 keeps the same MSRP as its predecessor, and we think the approach of borrowing the design from an older Novablast makes a lot of sense for this series and helps to cut production costs.
You get a substantial amount of cushioning, a stable platform, and now a seriously impressive outsole without moving into premium price territory. The lack of energy return holds it back a bit, but for those who prioritize reliable daily mileage, we find the price particularly attractive.
| Dynablast 6 | 130 € |
| Media de la categoría | €167 |































