Verdict from 3 experts and +100 user reviews

5 reasons to buy

  • Those who have tested the Saucony Type A9 are welcoming of the width profile, stating that it is accommodating.
  • The isolated fabric loops that serve as the lace-holes of the fit adjustment system are praised for not causing any hot spots to form.
  • Some testers have noted the dependable durability of the materials, reporting that this Saucony running shoe didn’t break down on them as they took on the miles.
  • Many runners welcome the sizing scheme that’s used for this product; they like that it adheres to their usual preferences.
  • The silhouette has enjoyed a bevy of fans for having lively colors and sleek design choices.

2 reasons not to buy

  • A few people claim that the forefoot section is a bit tight for natural toe splaying.
  • According to a consumer, the tip of the tongue unit has a tendency of rubbing against the skin irritatingly.

Bottom line

The overall feedback for the Saucony Type A9 has been extremely positive. The neutral pronators who have tested it report that it is a worthy successor to the Type A8 model. The updated configuration of the upper, the durability of the components, and the soundness of the looks are elements that are highlighted. On the other hand, the forefoot section’s apparently too-tight make and the irritating tongue unit have become the source of some testers’ ire.

Roadsters and fans of running shoes designed for neutral pronators are the target market of the Saucony Type A9.

Tip: see the best running shoes.

Good to know

  • The Saucony Type A9 is an update to a well-known series of running shoes that are meant for speed training sessions and competitions. This product’s underfoot platform boasts most of the same features as its predecessor, the Type A8, but it also upgrades its outsole to dole out extra grip and protection without sacrificing flexibility.
  • Changes to the upper include a return to the open mesh exterior, replacing the engineered mesh of the previous model. This configuration renders the silhouette capable of accommodating the addition of 3D-printed overlays, elements that don’t usually adhere well to engineered mesh.

The standard measurements were used when the Saucony Type A9 was made. Runners can use their typical choices when it comes to size. However, it is also healthy to go to brick and mortar stores to test the shoe first before making a purchase decision.

When it comes to the fit, the available profiles are D - Medium and B - Medium for men and women, respectively. These width determiners are indicators that the runners with low or medium foot dimensions are the ones who are likely to enjoy the in-shoe experience of this product.

The outsole unit of the Saucony Type A9 is made of PWRTRAC, a rubber compound that is able to resist the abrasive nature of the surfaces. This technology is also meant to provide precise traction on the asphalt, ensuring movement control and balance with every step. The rubber layers are placed on the contact points of the heel and forefoot.

Shallow flex grooves line the surface of the entire external pad while deep trenches are placed near the ball of the foot, the midfoot and the heel. These channels make the entire underfoot platform as flexible as possible, thereby permitting the natural motion of the foot as it goes through the gait cycle.

A tire-like tread design evokes the grip and forward-momentum of the tires of a vehicle. The zigzagging and arrow-like grooves help each traction node to precisely deliver on the promises of surface adhesion.

The midsole unit of the Saucony Type A9 is made of SSL or Saucony Super Lite (SSL), which the brand touts as one of their lightest accoutrements. This full-length foam offers reactive steps and well-attenuated landings. It is also flexible enough to smoothen the foot’s capacity to transition from the heel to the toe. SSL is used in many of Saucony’s shoe series, including the well-received Saucony Guide roster.

A thin insole is placed right on top of the primary cushioning unit. This add-on is meant to place a soft surface for the underside of the foot, separating the hard-textured last from the tactile perception of the runner. It can be removed or replaced with a new one if the wearer decides to do so.

The upper unit of the Saucony Type A9 is comprised of open mesh. This multilayered material is designed to cover the foot and keep it from wobbling during the run. It is lightweight and capable of following the movements of the foot as it transitions from the heel to the toe. Breathing holes permit environmental air to enter the interior compartment, thereby maintaining a cool and dry ride.

3D-printed overlays adorn the sides and the front of this road running shoe. The purpose of these synthetic prints is to bolster the upright construction of the upper unit. They are also designed to maintain a snug and secure fit without adding any tangible weight to the whole product. They’re colored and stylistic to match the practical purpose with an aesthetic flair.

A traditional lacing system is used for this racing shoe. Thin and flat laces snake through fabric loops that serve as the eyelets. This fit adjustment method runs the entire instep, covering the bridge of the foot and the middle part, as well. When the laces are tied, the lace-loops and the fabrics go along, giving a secure yet customized wrap that adheres to the preferences of the wearer.

A thin tongue unit blankets the skin of the foot from the potentially abrasive nature of the crisscrossing shoelaces. The seamless material that composes this part encourages anti-chafing and material bunching.

The lightly padded rear collar has the goal of securing the heel in place and preventing it from exiting the interior chamber unexpectedly.

A fabric tab is stitched onto the very back of the silhouette. The word ‘Saucony’ is emblazoned on it to enhance brand recognition.

Jens Jakob Andersen
Jens Jakob Andersen

Jens Jakob is a fan of short distances with a 5K PR at 15:58 minutes. Based on 35 million race results, he's among the fastest 0.2% runners. Jens Jakob previously owned a running store, when he was also a competitive runner. His work is regularly featured in The New York Times, Washington Post, BBC and the likes as well as peer-reviewed journals. Finally, he has been a guest on +30 podcasts on running.