|Update:||Brooks Ravenna 11|
|Weight:||Men: 267g | Women: 235g|
|Heel to toe drop:||Men: 10mm | Women: 10mm|
|Arch type:||Medium arch|
|Strike Pattern:||Heel strike|
|Distance:||Daily running | Long distance | Marathon|
|Heel height:||Men: 26mm | Women: 26mm|
|Forefoot height:||Men: 16mm | Women: 16mm|
|Width:||Narrow, Normal, Wide | Normal, Wide|
|Colorways:||Black, Blue, Grey, Pink, White|
|SKUs:||006, 066, 077, 082, 093, 110, 376, 429, 479, 615|
Reviews from around the internet
- 94/100 by RunRepeat (2 in-depth reviews)
- 90/100 by Road Trail Run
- 90/100 by Motion Control Running Shoes
- 75/100 by Road Trail Run
- 94/100 by Road Trail Run
- 92/100 by Doctors of Running
- 92/100 by Believe in the Run
- 91/100 by Gear Institute
- 88/100 by Road Trail Run
- 80/100 by Running Shoes Guru
- 92/100 by The Wired Runner
- 90/100 by Chris G.
- 88/100 by ViewInSports.com
- The Brooks Ravenna 10 like the Transcend 6 is a road running companion that is a part of the global roster of stability shoes for runners. This product features a sporty yet subdued look, with a seamless design and a helping of printed overlays to accentuate its modern sensibilities. Moreover, the façade has open pores that help with breathability.
- The midsole unit of this update to the Ravenna 9 is made of BioMoGo DNA, a form-fitting foam that is made of environmentally friendly components. Holistic GuideRail pieces are placed in the medial and lateral sections of the platform to reinforce midsole integrity and deliver underfoot stability.
- Blown rubber is used for the outsole unit, and it’s meant to protect from abrasion, and its spongy nature is tasked with providing an extra bounce to each step. Flex grooves encourage the natural bending capacity of the foot.
The sizing scheme of the Brooks Ravenna 10 follows the usual expectations of consumers. Full and half sizes are available so people can make adjustments and accommodate allowances when it comes to the in-shoe experience.
Widthwise, the options are D – Medium and 2E – Wide for men and B – Medium and D – Wide for women. This stability running shoe can welcome a variety of foot-shapes and dimensions.
The semi-curved last works with the form-accommodating upper to contain the naturally curved outline of the human foot.
Blown rubber is the material that is used for the outsole unit of the Brooks Ravenna 10. This compound is designed to protect the midsole from abrasion and to provide grip over the surfaces. It also provides extra cushioning through its slightly squishy construction.
The Midfoot Transition Zone is comprised of minimal midfoot design with a crisscross rubber pattern. It is meant to guide the foot through the gait cycle, smoothening the transition from the heel strike to the toe-off.
The forefoot section features flex grooves. These shallow trenches are created to make the underfoot platform as flexible as possible, thereby permitting the natural movement capacity of the foot as it takes each step.
Cushioning is the responsibility of the BioMoGo DNA which runs the entire length of this Brooks running shoes. This full-length foam is the amalgamation of two propriety technologies: BioMoGo and DNA. The former makes up the bulk of this feature, and it’s made of environment-friendly materials; the latter is a slightly malleable piece that conforms to the shape of the specific wearer’s underfoot. A custom in-shoe feel and well-rounded cushioning are the goals of this tech.
GuideRails are added to the medial and lateral sides of this running shoe. While the one on the outboard section is short and only meant to steady the heel, the one on the medial side is for the stability of the arch and the correction of the wearer’s stance. Both under-pronation (high-arch structures) and overpronation (flat-arch structures) are the targets of this feature.
The upper unit of the Brooks Ravenna 10 is made up of a one-piece mesh, which is material that has a near-seamless construction. It has open-weave sections to elevate the capacity of the façade to accommodate the flow of air into the foot-chamber. It also has close-weave portions to heighten durability and the security of the foot.
Thin synthetic overlays are printed onto the sides and the instep. These add-ons bolster the upright structure of the upper unit. They also make sure to help when it comes to locking the foot in place and preventing in-shoe wobbling.
A traditional lacing system is used for the Ravenna 10. It involves semi-round laces snaking through discreet eyelets on the bridge of the shoe. These elements work together to provide a secure fit. Runners can adjust the snugness or looseness of the coverage by manipulating the laces.
A lace anchor in stitched on the tongue unit. This fabric loop links the laces and the tongue together, preventing fabric deviation and the skin irritation that comes with such an occurrence.
The lightly padded tongue and collar are meant to cushion the ankles, the Achilles tendon and the roof of the foot. These parts of the upper unit also have the goal of averting accidental shoe removals, thereby increasing confidence when running.