Fit & Sizing
The careful selection of leather materials suitable for its advanced construction methods is a commitment that Ecco strongly upholds for many decades. The Ecco Enrico’s full-grain leather offers strength and can adapt to different seasons year round.
As with any premium leather footwear, Ecco Enrico tends to be tight on the onset, but with an adequate break-in time, it submits to the comfort cravings of the feet. The longer the feet get acquainted with the mold, users said the shoe loosens up, releases any restrictions on the toes, and offers a smooth walking experience.
Ecco Enrico runs true to size and can be obtained in men’s sizes that extends from 5 to 16 US. It has a full lace-up closure that allows users to adjust the fit of this shoe.
Ecco Enrico Style
The versatility of a shoe goes immediately right out of the window or get dusted on shoe shelves if it lacks style, comfort, and durability. And although leather sneaker is a style that suitably persists any season or trend, not all shoes built with it fit the category.
One brand that does not fall short in providing up-to-the-minute leather sneaker selections with long-lasting attributes is Ecco which has painstakingly devoted years to perfecting its craft. It largely depends on the wonders of tanned rawhides in producing tons of its sneaker designs. The low-top Ecco shoe, which is exclusively for the men consumers, is built with the most sturdy and durable full grain leather. Its tight grain quality makes it resistant to moisture. The longer one uses it, the more it gets better.
Enrico promotes a style that allows users to dress up or down; a quick fix for male consumers shooting for that elite yet casual look, aiming to be a bit dressy, or merely needing a reliable shoe that will provide service for a long time.
On a practical aspect, it can be paired with almost any hard-wearing pants either made of denim or even cotton. As an add-on to its sophisticated detailing, it has a moisture-wicking textile lining and a removable leather-covered insole which keeps feet fresh, making it a desirable choice for everyday wear.
The ability to manipulate each step in the process of treating rawhides to produce leather is an asset Ecco can claim full ownership to. With such capacity, it was able to create the Ecco Enrico, a luxe-looking sneaker covered with a hard-wearing natural full grain leather precisely assembled through skillful stitching process.
The beautifully crafted exterior of this shoe which is almost spotless is a product of ingenuity using Ecco’s trademark Direct Injection Production (DIP) sole technology. The flexible polyurethane compound that makes up its midsole and outsole is directly fused to the upper without the need for adhesives or threads. It creates an instant fit and most reliable bond between the upper and sole which is said to guarantee longevity.
Inside the Ecco Enrico sneaker is a moisture-wicking textile and breathable inlay sole that keeps the feet fresh while locked under a leather shell. It goes to say that this sneaker has gone through rigid quality tests before it ends up on the feet of consumers.
Ecco Enrico History
Ecco Enrico’s supple and noble looking silhouette in full grain leather speaks of a brand that has been around for over half a century now and has been successful in producing high-quality and stylish shoes for women, men, and children using rawhides.
Leather, which is the primary material in Ecco’s shoe production, has long been the heart and soul of this Danish brand. When Ecco’s founder Karl Toosbury gave up his secure job as an overseer of a shoe factory in Copenhagen to venture on his own, he already meant serious business.
Along with his wife and daughter, they rented a small house in the agricultural town of Bredebro in Denmark and utilized an old factory in the middle of the farmland. This was the place where he pegged the beginnings of Ecco way back in 1963.
Karl, a passionate shoemaker who has been trained in such craft as a boy, deeply embedded the value of hard work into his own business by emphasizing high-precision standards in every shoe his company produced. In the succeeding years, he focused on the advanced design until his brand became known across Scandinavian markets and soon began exporting shoes to Norway, Sweden, and Finland.
Its market grew throughout Europe as the consumers were receptive to its breakthrough features and almost unrivaled comfort elements.
In 1985, while continuously conducting research and development initiatives for its brand improvement, Ecco started making its leather in Portugal. But it was in 1991 that Ecco opened up a beamhouse and tannery, as well as a shoe factory in Indonesia which was rebuilt in 2012.
According to Karl, going at the very root of its shoe production, particularly sourcing out and tanning rawhides are the only method to obtain the optimum quality of leather he desired. In 1999 it added another tannery unit, this time in Thailand, importing wet blue leather from the beamhouse in Indonesia. Not too long later, in 2002, it opened another one in Holland followed the China facility in 2008. These two are among the most modern tanneries it has ever built.
In the autumn of 2013 Ecco inaugurated a new finishing plant in the Netherlands, where Ecco operates a state-of-the-art beamhouse and tannery. The facility became a gateway for the production of luxury leather. Currently, Ecco’s tanneries are also among the leading sources of leather for fashion, sports, and automobile industries.
- Ecco Enrico has a removable insole with ECCO Comfort Fibre System. This interchangeable insole of tanned leather extends the life of the footbed while keeping the feet fresh since it is made of air holes.
- Ecco's production takes place in a number of factories around the world, including Denmark, Portugal, Brazil, Indonesia, Thailand, China, and Poland.
- Hanni Toosbury, the only child of founder Karl Toosbury, takes full leadership of the company soon after Karl Toosbury’s demise in 2004.